A good trampoline in the backyard can be year-round fun and exercise for the whole family, right? But, you may have to end up the fun by dismantling this equipment for some cases like in extreme snow or hurricane.
That’s why you may be wondering how to disassemble a trampoline easily. Don’t worry, you are in the right place to know the fact in detail. And we’re ready to help you out!
Well, taking apart the trampoline is actually the reverse action of assembling the trampoline. Learning some simple tricks anyone can do it easily. It is very easy if have the right tools, just detach the parts one after another. Interesting, yeah!
Putting down the trampoline you can protect this exercise tool from harsh weather that will extend its lifespan greatly. So, let’s learn the trampoline taking down method for a greater benefit!
Best Ways To Take Down Your Trampoline Like A Pro
Trampoline disassembly can be divided into two categories- full dismantling and partial dismantling. Depending upon the situation, you might put down several parts while keeping other parts up or go for the full dismounting. However, we’ll explain the complete disengaging process here.
Before we hop on the trampoline disassembly process, let’s discuss a brief on some basic things that you should consider prior to trampoline dismounting.
Why Should You Disassemble The Trampoline?
Trampoline disassembly is required for many reasons such as-
Harsh weather can damage the trampoline severely. Snow and moist weather are a potential threat to the trampoline. It may damage the springs, mat, enclosure net, safety pad even can form rust in the frame.
So, if you live in a heavy rainfall area take down the trampoline before winter knocks. This will protect your trampoline from the chill. For low snowfall areas, weather cover is good enough to protect the trampoline.
Similarly, trampoline disassembly is beneficial during storms and hurricanes. If the forecast says a hurricane is at the front door don’t delay detaching all the parts of the trampoline as wind stakes are not enough to hold the trampoline in this situation.
Also if you don’t want to use the trampoline in summer or go out of home for a couple of months then you can consider partial or full disassembly of the trampoline.
Sometimes you might relocate the trampoline to another place. This includes backyard renovation, shifting to your new house, handover the trampoline to another owner’s backyard, and you name it! If any instance happens to you trampoline dismantling is necessary.
Sometimes you can move the trampoline without dismounting. But, putting down will be the last option when the moving method won’t work or the trampoline is heavy enough.
What Are The Benefits Of Taking Down The Trampoline?
Trampoline disengaging provides numerous benefits including-
Extend Trampoline Lifespan
When you disassemble the trampoline and keep it inside harsh weather won’t affect on trampoline thus protecting your trampoline and extending the overall life.
Save Extra Penny
Trampoline disassembly will protect your trampoline from being damaged hence saving extra cost to buy a new trampoline or at least the replacement cost. So, trampoline taking apart will save your penny.
Can I Dismantle A Trampoline By Alone?
Yes, you can take down a trampoline by yourself. But it’s recommended to take another person’s help due to safety factors. If you go to dismantle the trampoline without anyone’s help there is a high chance of falling the heavy frame on your feet that might hurt you seriously.
You can dismantle the small trampolines like 7 ft, 8 ft, or 10 ft by yourself. But if the trampoline is large enough, such as 12 ft, 14 ft, 15 ft, or other larger models, you shouldn’t try it alone. In this case, you need at least two people to complete the disassembly process.
If you want to dismount a trampoline by yourself, you should consult with experts, read the manufacturer’s trampoline disassembly instructions. On top of that read our guidelines thoroughly to be a master.
When you understand all the processes clearly, go for trampoline uninstalling. But, if you are not confident then take help from family members or friends even you can hire a professional trampoline assembly-disassembly technician for hassle-free trampoline dismantling.
What Tools Do You Need To Take Apart A Trampoline?
Like taking apart other equipment, trampoline disassembly demands some basic tools.
Here is a list of trampoline disassembly tools-
- Spring pulling t-hook
- Electric drill with Philips bit
- 10 mm spanner or Allen wrench
- Screwdriver or pliers
- Caulking gun
- Rubber mallet
- Hand gloves
All the tools aren’t necessary for every demounting. In most cases, you can complete trampoline disassembly using the spring pull tool, electric drill, and a pair of hand gloves. Other tools are optional or alternative to these.
You may also need a trampoline box and a good storage area where you will keep all the parts safely. This is necessary otherwise trampoline parts like the mat, safety pad, and enclosure net will be affected or damaged by insects or moisture.
Let’s have a quick overview of some of the common trampoline dismantling tools.
Spring Pulling Tool
Spring removing is an essential part of trampoline disassembly. Spring pulling tool looks like T that consists of two ends- handle and spring pulling end. Due to shape spring puller is also named as spring pull T-hook, trampoline spring tool, T hook spring puller, etc.
The handle is built from metal, plastic, or rubber. An ergonomically designed handle helps to exert force on spring attachment or detachment. And the hook of the spring puller is made of durable metal.
There are also trampoline spring tool alternatives. Several good substitutes for trampoline spring pullers are pliers, Spanners, screwdrivers, caulking guns, and more.
So, if you don’t have a spring puller these trampoline spring puller T-hook alternatives will help you do the job done. Moreover, you can make the trampoline spring T-hook by yourself using wood and nail at home.
Most trampoline manufacturers provide the spring puller tool with the trampoline packages. However, you can buy it either from a brick-and-mortar shop or online.
If you are looking for the best spring pull tool for your trampoline disassembly. You can consider our recommended T-hook spring pull.
Editor’s Choice: Best Spring Puller T-Hook For Trampoline Spring Removal
SANJOIN Trampoline Spring Pull T-Hook is a universal spring assembly or disassembly tool. So you can use this for detaching any length of springs from any trampoline brand. The handle is plastic constructed, whereas the hook is a powerful metal made.
The handle is 4.56 inch and the shaft is 4.45 inches long. This extended shaft will allow you to pull springs safely. Moreover, the finger groove ergonomic handle allows a comfortable and strong grip.
So, get this now to take spring off safely. Also, you can use this for quick trampoline wind stakes removal.
Electric Drill With Phillips Bit
Unscrewing the frame parts is time-consuming and tiresome. But if you own a cordless electric drill with Philips bit, this will make your task easier. But we recommend you to learn the tricks on how to use an electric drill safely before you use it on the trampoline.
An electric drill is a must for professional trampoline assembly or disassembly servicemen. And as a homeowner, you can also consider this for quick disassembly of your trampoline frame screws.
We highly recommend BLACK+DECKER LDX120C 20V MAX Cordless Drill.
Screwdriver, Allen Wrench & Spanner
If you want to remove or loosen the trampoline frame nuts. It’s recommended to have the right tools like a screwdriver, Allen wrench, or 10 mm spanner. It’s better to have the tools before you start dismantling the trampoline.
Some trampolines packages include these tools, that’s great. Otherwise, buy a good-quality screwdriver or Allen wrench or spanner that will fit with the nuts.
There are many multi-tool boxes that include all the items together that allow you to loosen any nut. These items are a good option for trampoline disassembly. You can also use the screwdrivers and pliers as spring tool alternatives.
The Capri Tools10 mm Spanner will be a handy choice for you in this regard.
You need a good pair of hand gloves while disassembling the trampoline. Gloves are used when detaching the rusty springs and metal parts to avoid injuries and safety hazards. These protect hands from metal chips, dirt, and other debris.
Not all hand gloves will suit trampoline dismantling. The gloves should be thick enough so you get proper hand safety. Double-coated work gloves will be the best choice in this regard. So ensure hand safety before you uninstall the trampoline.
If you need a good pair of hand gloves for trampoline disassembly consider the G & F Products – 3100L-DZ-Parent Rubber Latex Double Coated Work Gloves.
How to Disassemble A Trampoline Step By Step?
Now, you have all the tools at hand to take apart the trampoline.
7 key steps of trampoline disassembly are-
- Trampoline cleaning
- Remove ladder, pegs, and other slack parts
- Take down the poles, and enclosure net
- Detach the spring cover
- Disassemble the springs
- Fold the trampoline mat
- Take apart the frame, and legs
After knowing the key points, let’s know how to take a trampoline apart in detail!
Note: If you are not adult enough, don’t try trampoline disassembly at home. It is also recommended to keep children away from trampoline uninstalling places.
Step 1: Clean The Trampoline
You may be prepared to put down the trampoline but is your trampoline ready yet? The trampoline should be cleaned well if it is filthy before you dismantle it.
If you store the trampoline with damp, rust, bacteria, fungus, corrosion, and other environmental debris these will harm the trampoline severely. This will also lessen the longevity of the trampoline. So, it is necessary to clean first before you disassemble the parts.
To clean the trampoline sweep the trampoline with a long handle broom. If needed, clean the accumulated dirt using soapy solutions and rinse with water. Then, let the trampoline in sun to make it dry.
Step 2: Remove Ladder, Pegs, & Other Slack Parts
After cleaning and drying the trampoline, it’s time to take down the trampoline parts one by one. So, begin with the slackest parts and accessories like the basketball hoop, ladder, pegs, sprinkler, tent, you name it.
You can remove the trampoline wind stakes or pegs easily using the spring puller tool. The ladder, basketball hoop, and other parts can be detached by untying the straps.
Step 3: Take Down The Poles & Enclosure Net
Now go for detaching the enclosure net and poles. Some trampolines have a top-rail over the poles, in this case, put down the top-rail first. Then untie the straps of the enclosure net and remove the net. Afterward, detach the net poles from the trampoline frame.
If the net has any rip repair it and clean the accumulated dirt with detergent or soapy solution. Then make them dry. You can wrap the poles with cloth or wrapping tapes to prevent corrosion of the poles.
Step 4: Detach The Spring Cover
Most trampoline frame covers are one piece of cover used for safety purposes. You can easily remove the spring padding just by untying the straps of the pad underneath the trampoline.
But some pads are stitched with jumping mats or attached with the trampoline net. If that happens with your trampoline follow the manufacturer’s trampoline disassembly guidelines to put down the safety pad.
After detaching the cover, clean the accumulated birds’ poop, black residue, and other dirt from the pad using a soapy solution and mildly warm water. But don’t soak the cover in the water as it’s very susceptible to water. Then dry it in sun and fold it several times to keep it in the box.
What to do now? Well, it’s time to dismantle the trampoline mat and springs.
Step 5: Disassemble The Springs
Removal of trampoline springs is the trickiest part of taking down a trampoline process. You know, springs and mat are attached together.
Before we teach how to dismantle springs from the trampoline, it’s important to know how springs are connected to the trampoline.
Springs have two ends- closed-end or loop side that goes to the V-ring of the mat, and the open end or free side that is attached with the frame.
So, what is the best way to take springs off the trampoline?
How To Remove Trampoline Springs Using Tool?
Spring puller or spring puller alternatives (like pliers, caulking guns, screwdrivers) are used to remove springs. So, how do you take apart the springs from the trampoline?
When you want to disengage springs using a trampoline spring puller tool, or spring tool alternative (pliers, screwdriver, Spanner, caulking gun) just hook the open end (frame side) of the spring and pull it toward you. Thus springs will be removed.
On the other hand, if you hook on the closed-end (mat-side) of the springs pull it toward the mat center until the spring detaches. Similarly, remove all the springs one by one.
Whether you use a spring tool or spring tool alternative it’s important to know the right way on how to use a spring tool in trampoline disassembly safely.
You can see the video to learn the trampoline spring removal process.
How To Remove Trampoline Springs Without Tool?
This is simple, just hold the middle of the spring with your hand and pull it toward you until it removes from the frame slot. Then detach the other side too.
After that, using the first detached spring you can dismantle all the springs quickly. Just hook any end of the trampoline spring with the detached one and pull until dismantle the spring.
In this way, remove all the other springs without any spring t-hook or spring tool alternative. If springs are old or look rusty don’t forget to use hand gloves.
For visual learners, this video will teach you how to take springs off without any tool.
Step 6: Fold The Trampoline Mat
When you detach the springs, the mat will be separated automatically from the trampoline. Mat is the most exposed part of the trampoline where different types of dirt form usually.
If you store the trampoline mat with dirt there is a high chance to damage the mat. So, clean the mat before you fold.
Some common dirt that piles in the mat are birds poop, black residue, debris, and you name it. Clean them well using the soapy solution and rinse with water. If there is any mat hole repair it soon. After that, dry out in the sun.
Now lay down the mat in the ground and fold it up several times. Firstly, fold it by half, then repeat the action until it becomes very compact to fit your storage box.
Read: Round trampoline reviews
Step 7: Take Apart The Frame & Legs
After dismounting the trampoline springs and mat the only thing that is left there is the frame. So, how to dismantle a trampoline frame? Disassembling the trampoline is all about unscrewing the screws and taking apart the parts one by one.
Phillip’s head screwdriver will help you a lot to remove the screws easily. And a power drill will help you do the removing the screws faster. In this stage, you can use hand gloves, eye goggles, and boots for safety.
Now detach the top-rail from the legs by unscrewing the nuts. Don’t do this also. Take help from partners to avoid falling the heavy metal legs or frame on you that may hurt you seriously.
While uninstalling any legs stand middle of the leg and exert upward pressure on the top rail thus the leg will be disconnected. In some cases, legs and top-rail are joined very tightly where a mallet can help you detach them comfortably.
So, the legs are detached and only the outer rings and T-sections are left. Keep the legs together and go for removing the remaining parts. Now disengage the tube rails by exerting pressure and twisting the rails. Also, detach the T-joints. After that clean them well and remove rust too.
So, you’ve successfully disassembled the trampoline parts by parts. Congratulations!
If you are a visual learner, the following video will help you to know more about how to take a trampoline apart.
Trampoline Dismantling Instuctions Bonus Tips
How To Store Trampoline After Taking Down?
If you demount the trampoline for harsh weather like heavy snow then you have to store the trampoline in a dry and safe place. Here is the trampoline packing process in a brief.
Lay down all trampoline parts that you’ve disassembled already. Sort the similar parts together like all springs together, frame parts in one place, etc.
Maybe you’ve cleaned all the trampoline parts well after removing them. Still, if any part has dirt or debris, clean and dry it out. Also, remove rusts from metal parts.
If you have trampoline storage boxes, bring them out and pack all the parts inside there. Keep screws and small parts in small packets. Don’t worry, if you have boxes. Make some boxes using the thick paper boxes or use cloths as boxes.
After that store all the boxes in your garage or store room until you reinstall the trampoline. That’s it!
Is Cleaning Essential Before Reinstallation Trampoline?
Before storing the trampoline you might be cleaned the trampoline well. But if you store it for longer times bacteria, fungus or debris may grow there, so it’s important to clean them again before you reinstall.
When it’s time to install the trampoline, bring the trampoline box to the desired place, clean all the parts and assemble all the parts together.
Is It Necessary To Read Manufacturer’s Disassembly Guidelines?
Yes, it’s recommended. The above-mentioned process is a general guideline. But this may vary a bit from one trampoline brand to another. So, we highly recommend reading the trampoline manufacturer’s disassembly tips before you start dismantling it.
For example, the bungee trampolines and Springfree trampolines disassembly process is quite different from the above-mentioned process.
How to put down a Springfree trampoline?
Springfree trampoline disassembly is easier than the usual trampolines. At first, dismantle the basketball hoop, net, and poles. To detach the poles, you have to remove the c-clips connected with the trampoline frame.
The flexible rods taking down is tricky here. Palm up the top of the flexible rod with your primary hand and push the rod forward. At the same time, grip the rod holder with your secondary hand and lift it up. Thus using both hands you can easily detach the flexible rod.
If there are two-person, one will go under the trampoline and pull the top of the rod towards the trampoline center. And another person will lift up the rod holder. This allows quick disassembly of the trampoline.
After removing all the rods, the mat will be detached too. Then take apart the frame and legs like the usual models that we discussed above.
How To Disassemble A Mini-Trampoline?
Mini trampolines are small in size so most of them can be easily carried from one place to another. Still, we’re giving you the tips to take apart these models.
To disassemble the mini-trampoline or rebounder, detach the springs from the mat and frame. If there are bungee cords instead of springs remove them loosening the knots.
Then detach the legs from the frame through unscrewing. After that, take apart the top rails of the frame.
Note: Most mini-trampolines are foldable and used indoor thus you mightn’t dismantle them. Still, we’ve explained the process here for the enthusiasts.
How To Take Apart A Rusty Trampoline?
Taking down the rusty or broken springs are challenging than the healthy springs. In this case, it’s mandatory to wear gloves at hand to protect hands from rust and metal chips.
Basically, metal parts like poles, springs, and frames may form rust. So, while removing the rusty springs or metal parts do the tasks carefully. Remove the net and spring pad then go for detaching the springs.
The first two springs’ removal is very important here. Using a spring tool or alternative t-hook pull tool disassemble the first spring. Then detach just the opposite spring of the first one. So, two primary springs removal is completed.
After that dismantle all other springs one by one following the first two springs detachment methods. When springs and mat detachment are completed then take apart the frame.
How To Remove Rust From Trampoline Springs?
After removing all the springs, check their health conditions. If you find rust in springs remove them using homemade lemon paste or apply rust remover. If any other metal parts like frame or poles have rusted, remove rust from them too.
You can make the lemon paste at home easily. Mix two lemon or lime juice and a half cup of salt in a bowl. Then apply the paste in the rusty springs directly with a wooden tongue depressor.
Then leave the paste applied springs for two to three hours. After that scrub the mixture with corroded springs using a toothbrush. Now rinse the springs with water and dry them using a cotton cloth.
Afterward, apply petroleum jelly or grease in the springs. This will remove the rust and make the rusty springs almost new.
Editor’s Choice: Evapo-Rust ER012 Super Safe Rust Remover
If you want to remove rust from springs or metal parts of the trampoline, Evapo-Rust ER012 Rust Removers & Chemicals will be an ideal choice. The package comes with a 1-gallon bottle that can remove almost a half-pound of rust.
Evapo-Rust can remove rusts fast without any sanding or scrubbing. Just submerge the rusty part in this water-based remover solution. Then rinse with water and afterward apply corrosion inhibitor.
This is a non-corrosive and non-toxic rust remover. It is biodegradable and there are no harmful chemicals, acids, or odor. You can use this to remove for any type of rust removal purpose.
Is There Any Trampoline Disassembly Service Near Me?
Yes, there are many trampoline disassembly services in your city if you are a US citizen. Just search in google typing trampoline disassembly service near me with your city name. You will find lots of options there.
We recommend disassembling the trampoline by own. But, if you are not confident or don’t have enough time only then hire a professional trampoline disassembly serviceman to do the task. But be ready to pay a handsome amount of money to him/her.
Frequently Asked Questions
Q: Is it essential to learn the trampoline disassembly process?
Answer: Yes, it’s recommended to learn how to dismantle a trampoline in the right way. If you hire a professional even then you should learn the process so you can do it in need of essence.
Q: How long does it need to take apart a trampoline?
Answer: Usually, larger trampolines need comparatively more time to disassemble than the smaller models. However, it depends on the technician’s skills, tools quality, and several more factors.
On average, it needs almost 3 to 4 hours to disassemble spring-based trampolines by a single man. On the other hand, Springfree trampolines need around 2 hours in the dismantling process. And small indoor trampolines can be disassembled within 15 minutes.
Q: What to do if the screws are stuck in the frame?
Answer: This is a very common scenario as screws are fixed in a place for several months even years. In this case, apply penetrating oil or spray in the metal screws. And if possible soak the screws in oil for at least 10 minutes. It will make the screws loose very quickly.
Q: How much does it cost to have trampoline disassembly?
Answer: This depends on trampoline size and type. Professional disassembly service providers may charge $100 to $300 or even more for the full demounting of a trampoline.
Trampoline disassembly is not rocket science. Anyone can do it if he/she learns the method well. Whether you are a beginner or expert this article will level up your skills. Just follow the steps to take down your trampoline without any hazard.
Hopefully, after reading this article you now know the ins and outs of how to disassemble a trampoline. So, take down the trampoline and protect it from rough weather and extend the trampoline’s life.
One last reminder, focus on the project, especially while dismantling springs and frames otherwise severe injury may occur anytime. If you have any queries, please comment below.
Emily is an editor and co-founder of pickoutdoorgear.com. Besides her academic study, she loves outdoor activities!