8 Best Ways To Install A Trampoline On A Slope Or Uneven Ground: Trampoline Leveling Tips!

The ideal place to set up a trampoline is the smooth and level lawn. But, not all grounds are even and smooth equally, there are dips and curves too. So, if you haven’t any flat ground, don’t worry, you can install the trampoline in an unlevel yard and make it leveled.

Have you wondered, how to install a trampoline on a slope or uneven ground? Don’t worry, you can put up the trampoline on an unleveled place, or hill, or sloped land using some tricks. But, it requires some extra tasks than installing the trampoline on the plain surface.

There are several ways to secure and level your trampolines in the sloped earth. Out there, we bring the 8 best solutions for you today on how to level a trampoline on sloped yard. Let’s get started!

How To Set Up A Trampoline On A Slope Or Unlevel Ground

How To Install A Trampoline On A Slope

Determining The Slope Of The Uneven Place

Experts recommend setting up a trampoline in an even place. But, if there is no plain area, you can place the trampoline on uneven or sloped locations with proper leveling.

Before putting up the trampoline in an uneven area, your first task is to, determine the slope of the land. Depending upon the slope, you have to decide the right way to install the trampoline on the slope.

You can determine the slope of the unlevel earth using several basic stuff like a tape measure, carpenter’s level, and large wood plank (that should be equal to trampoline diameter).

To measure the garden slope, you might place the trampoline (after assembling all parts together) for a while in that area where you would love to set up the trampoline. Then, put the plank on the trampoline bed.

Now, set the carpenter’s level on the upper side of the wood plank. Then, lift the lower side of the plank until the bubble of the carpenter’s level becomes stable between two lines.

Measure the distance (y) between the trampoline bed to the top of the plank on the lower side when the carpenters’ level is leveled perfectly. Now, divide the measured height (y) by trampoline diameter or side to side distance (x). So, you will get the slope (y divided by x) from that.

If the value is higher than 7, it means the land is very sloped and it’s not safe to install the trampoline there. In that case, move the trampoline to any nearest location where the slope is lower than 7. After finding a suitable place, you can now set up your trampoline there.

8 Effective Ways To Install A Trampoline In Uneven Place Or Slope

While putting together a trampoline in an unlevel or slope lawn, you need some basic tools like a shovel, tape measure with the trampoline assembly tools such as spring puller, hammer, gloves, etc.

Here are 8 different proven methods to level the trampoline in uneven or sloped earth.

#1 – Add Soil In Down Side

Very simple, you can make the trampoline’s downside up by adding soil. Alternately, sand, mulch, gravel, even bricks can be used to level the ground. But, packed the soil well to ensure the soil is firm enough to hold the trampoline.

#2 – Dig Trench

Another traditional way is to dig trenched in the upper side to level it with the lower side. Then secure the trampoline legs on the trench, but be sure the trench height equals the required height.

After digging the trench, set the trampoline there and check trampoline bed is flattened properly. If needed dig the trench quite more for full flattened. The dig trench method is very effective to set up a trampoline on the hill.

The video below will help you understand how to dig a trench to level your trampoline on the slope or uneven surface.

#3 – Cut The Legs

Cutting down the trampoline’s legs might be a possible way to level the trampoline in an up and down ground. But, this is not recommended until other methods work. It will be awkward if you need to use the trampoline in the future.

You can cut trampoline legs only if you plan to set the short legs trampoline there permanently. After deciding, cut the trampoline legs using a saw or other cutting tools. Alternately, hire a professional to cut down trampoline legs.

This is a recommended Miter saw to shorten trampoline legs.

No products found.

#4 – Consider Adjustable legs

Some trampoline manufacturers introduce adjustable legs. So, you can simply adjust the legs’ height according to your need. You can either buy trampolines with adjustable legs or only the legs.

#5 – Trampoline Leveling Blocks

Trampoline leveling blocks is an effective and professional way to level the trampoline in an uneven place in the right way. Blocks are designed basically for RVs or cars, but work for trampolines too. They are very affordable, thus, you can try this unique way.

Leveling blocks are stackable hence you increase or decrease the height easily by attaching or removing the blocks. They come with an interlocking system so no chance of sliding or detaching one block from another.

After assembling several blocks to get your required height place them on the lower side of the trampoline for proper leveling.Lucking trampoline leveling blocks are available on amazon.

Here is a recommended 10 pack trampoline leveling block by Camco.

Camco Heavy Duty Leveling Blocks, Ideal For Leveling Single and Dual Wheels, Hydraulic Jacks, Tongue Jacks and Tandem Axles (10 pack) (44510)*
  • Provides Safe and Easy RV Leveling: Interlocking blocks stack to the desired height for customizable leveling
  • Compatibility: Can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, fifth wheel jacks and tandem axles
  • Heavy-Duty: Made of durable resin; Dimensions: 8 ½-inches x 8 ½-inches x 1 ½-inch. As the blocks are nested together, each block adds 1-inch of additional height.

#6 – Trampoline Leveling Kit

Another highly recommended way is to use trampoline levelers to flatten the trampoline in a jagged place. These leveling kits are made from durable, heavy-gauge steel. By joining them with trampoline legs, you can easily level the trampoline.

Trampoline leveling kits allow to lock them with the trampoline frame for a secure grip. Just screw the nuts or fasten the clamps and level the trampoline without any safety issues. But, each leveler kit has its own weight limit, don’t forget this.

If you need a heavy-duty trampoline leveling kit suggestion, here is Camco EAZ LIFT.

Camco 48866 EAZ LIFT Heavy Duty Slide Out Support | Adjusts from 19"-47" | Made with Rust Resistant Steel | Supports Up to 5,000 lbs. Each | Includes 2 Supports*
  • Protects slide out mechanism: Provides support to slide outs when extended
  • Adjustable: Adjusts from 19-inches to 47-inches in height
  • Unique Features: Universal fit top, space saving handle and tethered pin

#7- Bury The Trampoline

In-ground trampoline is a great idea to set up a trampoline in an uneven area. In this way, dig the required depth hole and set your trampoline there. This is costly but very effective for sloped land. If you bury the trampoline, level the surroundings to avoid rolling.

In-Ground Trampolines Standard*
  • Pre-engineered In-Ground Trampoline system
  • Designed, engineered and made in the USA!
  • Unrivaled performance and quality

#8 – Wooden Leveler

Putting wooden blocks in the lower side legs of the trampoline is a low-cost and easy method to set up a trampoline on uneven or sloped ground. In this case, you can stack wooden blocks vertically to get the required height.

Alternately, grounding the wooden blocks on the earth is also effective. After setting the legs of the trampoline on the wood plank, you might fasten the legs with clamps or other possible ways to get a secured base.

Here is a video that explains DIY leveling the trampoline on uneven ground using wooden levelers.

Frequently Asked Questions

Q: Why leveling the trampoline in an uneven place is important?

Answer: First of all, trampoline leveling is important for safety reasons. The uneven ground will result in an unleveled jump bed hence unsafe bounce. The sloped ground also drives to roll hazard thus leveling the ground is important.

Q: Is it safe to install the trampoline in sloped yard?

Answer: It’s not unsafe to set the trampoline in slope or unlevel place when you make the trampoline flat using leveling kit or or leveling the ground or trampoline leveled. However, if there is flat surface in your yard, don’t install the trampoline to the sloped land.

Also Read: Safe trampoline for children

Q: Is it necessary to add a trampoline net in the sloped area?

Answer: Yes, it’s recommended to install a safety net with a trampoline in a sloped or uneven area to prevent the rolling hazard. It’s also necessary to keep some leveled space surrounding the trampoline to avoid injury and rolling for sudden falling from the trampoline.

Also Read: 15 ft Trampoline with net

Q: How much does it cost to secure a trampoline on uneven earth?

Answer: It requires $20 to $200 extra penny to set up the trampoline on uneven or sloped land compared to the plain ground.

Final Thoughts

The wrong setup of the trampoline in the unleveled area might cause severe damage to the trampoline or could be a reason for serious injury. So, you shouldn’t overlook putting up the trampoline in the right way in an uneven or sloped area.

Hopefully, after reading the above guidelines, you might understand how to install a trampoline on a slope or uneven locations. Now,  set up your trampoline on any sloped or hilly place and feel you’re bouncing on an even surface!

Share this article:

Leave a Comment